The World's Smallest Satellite Tuners
These tuners employ surface-mount technology on one side only of conventional FR4 PCB material, and are aligned with only a single adjustment, so there is no need for the specialised test gear and individual optimization previously associated with tuner manufacture. This means they can be mass-produced by any consumer-grade assembly plant, saving up to 50% of the cost of a bought-in tuner can.
The design shown here features an enclosure just 5mm thick, with an internal volume of 8.2cc. It operates from a single 5V supply plus a tuning bias of 25V, and covers the frequency range 950-2150 MHz. Frequency Synthesis control is via the 2-wire I2C bus. On-board filtering ensures there is no degradation in the Euro-EMC compliance of the host apparatus.
Volume Bill of Materials cost is typically less than US $8.50 for the single-input analogue or digital versions. Options are available with 2 inputs and 2 IF bandwidths, with tuning extension down to 700 MHz, and with ultra-low phase noise for the most demanding digital applications. See Specification Features.
Return to RWT Home Page